LUFT Cube's Filterless Nanotech neutralizes VOCs, aerogels, toxic chemicals in the air around you
By using LED, SPP is more effective than HEPA when it comes to destroying & decomposing pollutants
Compact and portable, Cube allows you to enjoy fresh air even on the go
No more maintenance and filter replacement
Powered by USB type-C, Cube’s energy efficient and costs less than 2 dollars per year on utilities
Plug-n-play with one-touch power on/off
No ozone is produced in the process
Long-life UV LED lamps ensure perfect photolysis
Patented nanoreactors destroy toxic chemical gases, molds, bacteria, allergens and unpleasant smells
Existing aerodynamic technology for superior purification
Luft Qi absorbs ambient air and pollutants from all angles
As quiet as rustling, below 30dB for 40,000 hours (4.5 years)!
Luft Cube uses UV LED to excite patented stereo photocatalyst, using semiconductor electrons and holes to rapidly transfer, generating hydroxyl radicals and superoxide ions on the surface of photocatalyst, and organic carcinogenic gases (such as formaldehyde, toluene) in the air. With the taste molecule, the molecular chain is broken and becomes (mole) harmless CO2 and H2O.
The organic gas glue in the PM2.5, the organic matter in the cigarette smoke, and the odor around the life are "decomposed"!
Luft Cube's patented photocatalyst purification technology | Destroy mold, bacteria, pollen | Biogas adhesive
Innovative "destruction" of PM2.5-bio-gas gel purification ability
UV LEDs allow the photocatalyst to generate surface energy, constantly producing an "electron-hole" pair that only survives for 10-9 seconds at a time, using energy to "destroy" the cell walls of mold, fungi, bacteria, and pollen, causing toxicity or killing. Dead bacteria.
When the concentration of such biogas glue in the air decreases and the total amount of air allergens is reduced, it is not easy to induce the immune system response.
The "bio-gas gel" in the PM2.5 is often "destroyed" by the energy of the photocatalyst!
Patented Photocatalyst Purification Technology: Destruction Mode | Decomposition of Organic Gases and Tastes | Biogas Glue
Luft Cube purification principle
The secret of Luft Cube 10-9 seconds: OH- and O3- are continuously present on the surface of photocatalyst, which decomposes and destroys harmful substances in the air.
Common allergens in life, such as formaldehyde (decoration, paint, etc.), mold, bacteria, organic gas glue and bio-gas glue in PM2.5, even odor, are easily broken down in seconds, second damage. Of course, there is no need to worry about the secondary pollution of the filter.
24 hours of uninterrupted decomposition and destruction of harmful substances in the air, it is not easy to induce allergic reactions.
Allergic irritants that are more difficult to treat than PM 2.5 are irritating to mucous membranes such as the trachea and eyes. Most manufacturers send the test to a new machine with an activated carbon filter to absorb ozone, so that the ozone is reduced to a safe value, but in fact the amount of ozone will increase with the aging of the machine, the activated carbon adsorption capacity will be invalid for about half a year. If you do not replace the filter, you will be allowed to disperse the ozone. People with sensitive homes should pay special attention. # Especially in automotive environments where air is relatively non-circulating, it is not recommended
In addition, in order to avoid the motor noise generated by the CADR, some manufacturers choose to increase the adsorption force by increasing the high-voltage power, which will also increase the amount of ozone generated.